Software connection for IP / GigE Vision / USB cameras for time-synchronous video track in PLC-ANALYZER pro 6
Virtual HMI module
Alternative view on machine data: Virtual HMI module for PLC-ANALYZER pro 6
AD_USB-Box®
Highspeed USB – S7 MPI / PROFIBUS Adapter
The Highspeed USB – S7 MPI / PROFIBUS Adapter is a flexible alternative to all MPI/ PROFIBUS CPs.It is plugged to the S7-CPU directly and connected via USB-cable (3m) with a PC. Power supply of the cable via USB port. The adapter allows the full transmission speed of 12 Mbps and features automatic baudrate detection. The PG female connector is looped through, so more devices can be connected. Up to 32 simultaneous connections are possible. The software supports configuration and diagnosis.
S7 LAN (Ethernet Gateway for MPI/PPI and PROFIBUS)
S7 Ethernet-connection without expensive communication-processor. MPI/PPI/PROFIBUS-connection to S7-200, S7-300, S7-400 – 10/100 Base TX RJ45- ethernet plug, S7-sided 9,6 kBaud .. 12 MBaud, electrical isolation, power supply from the S7-PLC or ext. 24 V connection, PG female connector looped through, incl. driver software
USB-Connection PC – SIMATIC S5
The USB-Connection PC – SIMATIC S5 connects the PC via USB-interface to the programming interface of a SIMATIC S5. PC connection via USB and SIMATIC S5 via 15-pin Sub-D-male connector. Power supply of the cable via USB port. Driver software (Win 2000 / XP / Vista / 7 / 8 / 10) is included.Standard length 3 m. Special length available on request.
S5 LAN (Ethernet Gateway for S5 PG-Interface)
S5 Ethernet-connection without expensive communication-processor. Connect one to programming-interface S5 and the other end (RJ45-plug) to 10/100 MBit Ethernet TCP/IP, virtual COM-port on PC-site by supplied driver software PLC-(Multi)VCOM
USB Schneider Modbus+ adapter (TSXCUSBMBP)
The USB Schneider Modbus+ adapter connects your computer to a Modbus+ network, so that computer programs (e.g. PLC-ANALYZER pro) are able to exchange data with Schneider PLCs and other devices in a network.
Special-UPS 24 V DC (maintenance free) for BLACKBOX 4 Edge
Protects the BLACKBOX against failure of the 24 V DC power supply. If the power supply fails for a longer period of time, the BLACKBOX is automatically shut down in a controlled manner and automatically restarted when the power supply returns. For mounting on 35 mm DIN rail, input 24 V DC (22 ~ 29 V), output 24 V DC, incl. software and USB cable, configured ready-to-use when ordered with BLACKBOX 4 Edge.
4G LTE-Modem for BLACKBOX 4 Edge
Mini PCIe module with all frequency bands EMEA-Region Operating modes: LTE/HSPA+/HSPA/UMTS/EGDE/GPRS/GSM with GSM-UMTS-LTE folding antenna, SMA connector; incl. assembling, software installation and configuration
WLAN-AC USB Nano Adapter for BLACKBOX 4 Edge
Powerful WLAN-AC USB Nano Adapter for BLACKBOX 4 Edge.
ARC SYSTEMS
